Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterSensor Calibration in Fort Worth, TX
Sensor calibration in Fort Worth typically costs between $95 and $160, assuming the safety eyes are intact and the issue is related to alignment or signal interference. If you find your garage door reversing unexpectedly or refusing to close unless you hold the wall button down, you likely have a sensor misalignment or a faulty signal connection. At Servo Garage Doors Fort Worth, we handle these adjustments as a standard part of our Garage Door Repair in Fort Worth service, ensuring your safety eyes communicate clearly with your logic board.
We operate under The Haven Standard, which means we do not guess at the problem. Before we adjust anything, we document the current alignment with a photo record so you can see exactly why the door was failing. Our technicians are background-checked, uniformed professionals who arrive with the tools to test signal voltage and alignment precision immediately. If your system requires more than a simple adjustment, such as a full sensor replacement, we provide a flat, written price before we touch a single tool. Call us at (682) 297-6476 to have a technician inspect your system today.
When You Need Sensor Calibration
Your garage door sensors, often called photo eyes, are the primary safety mechanism for your opener. They require a clear, unobstructed path to function. In Fort Worth, we often see issues arising from shifting foundations in newer developments or simple vibrations from heavy traffic near major corridors like I-35W or I-30, which can knock sensitive brackets out of alignment over time and may require Track Realignment.
- The door reverses before hitting the floor: If your door starts to close but immediately reverses and the lights on your motor unit flash, the sensors have lost their signal. This is the most common sign that the eyes are misaligned or blocked.
- The door only closes when holding the wall button: This is a manual override safety feature. If the system detects that the sensors are not communicating, it forces you to hold the button so you can physically watch the door, preventing accidents.
- Intermittent operation during specific times of day: Sometimes, direct, intense Texas sunlight hitting the receiving sensor can wash out the infrared beam. If your door works fine in the morning but fails in the afternoon, we may need to adjust the mounting angle or install a glare shield.
- Physical damage or loose mounting brackets: If you notice the brackets holding the sensors are wobbly or bent, the sensors cannot maintain a consistent connection. We often see this in older garages where the drywall anchors have pulled loose from the studs.
- Moisture or debris accumulation: Fort Worth weather, particularly our humid springs and heavy rain events, can cause corrosion or buildup on the sensor lens. A clean lens is critical for the infrared beam to travel the width of the garage opening.
If you are experiencing these symptoms, please be aware that the sensors are a critical safety feature. Do not attempt to bypass them by taping them together or removing them. If you cannot get the door to stay down, call (682) 297-6476 for professional assistance.
Our Sensor Calibration Process
We follow a specific, evidence-based process to ensure your safety system is compliant with modern standards. Following Clause 4 of The Haven Standard, we photograph the state of your sensors upon arrival so you have a record of what we found.
- Visual Inspection and Testing: We first verify if the sensors have power. We check the status LEDs on the sending and receiving units to see if they are solid or blinking.
- Alignment Adjustment: Using a precision level, we adjust the mounting brackets. Even a slight tilt can break the infrared beam, especially across wider two-car garage openings common in newer Fort Worth subdivisions.
- Wiring Integrity Check: We inspect the low-voltage wire running from the sensors to the motor unit. In older homes, staples can sometimes pierce the insulation, causing short circuits.
- Logic Board Communication Test: We test the connection at the opener’s logic board to ensure the signal is actually being received and processed correctly.
- Final Safety Test: After calibration, we perform a formal obstruction test. We trigger the door and pass an object through the beam to ensure the door reverses instantly, as required by safety regulations.
- Documentation: You receive a documented photo record of the completed calibration, showing the sensors are now aligned and fully functional, closing the loop on our service visit.
BeforeAfterSensor Calibration Pricing in Fort Worth
We believe in transparent, upfront pricing. You will never be surprised by a bill when we arrive. Our pricing reflects the time and technical expertise required to diagnose and align your specific system, whether it is a modern Chamberlain unit or an older Genie system.
| Service | Estimated Price Range |
|---|---|
| Sensor Alignment & Calibration | $95 – $160 |
| Low-Voltage Wiring Repair | $110 – $185 |
| Complete Sensor Replacement | $175 – $260 |
The ranges above represent the total cost for the service, including labor and standard parts if replacement is necessary. If your sensors are simply out of alignment, you will pay the lower end of the spectrum. We provide a written price before any work begins, per Clause 1 of The Haven Standard. If you have a written estimate from another company, we are happy to provide a free second opinion. Call (682) 297-6476 to speak with us about your current estimate.
FAQs - Sensor Calibration
How do I know if my garage door sensors are bad or just dirty?
Clean the lenses with a soft, dry cloth first to rule out dust or spiderwebs, which are common in our area. If the LED lights on the sensors are both solid (usually green or amber) after cleaning, they are likely working. If they are blinking or completely dark, you likely have an alignment issue or a wiring fault that requires professional repair or possibly Cable Repair. Call (682) 297-6476 for an exact quote to fix the issue.
Can I fix misaligned garage door sensors myself?
You can gently nudge the brackets to see if the alignment improves, but we advise against aggressive adjustments or tampering with the wiring, as these are low-voltage systems that can easily be damaged. If the bracket is bent or the wiring is frayed, you need a technician to ensure the safety system remains compliant, and we can also check if Spring Repair is needed. We are available to help; call (682) 297-6476 for a free estimate.
Is it cheaper to repair the sensors or replace the whole opener?
In almost every case, repairing or replacing the sensors through our Garage Door Repair services is significantly more cost-effective than replacing the entire opener unit. A sensor calibration or replacement typically costs a fraction of a new motor installation. We always inspect the specific component first-we photograph the failure before we quote-so you only pay for what you actually need. Call (682) 297-6476 for a professional assessment.
Do you service all brands of garage door openers in Fort Worth?
Yes, we service all major brands, including Chamberlain, Genie, Clopay, Amarr, and others. Because we are independently owned and operated under The Haven Standard, we maintain a deep inventory of compatible parts for these systems. Whether you have a modern smart opener or an older chain-drive system, we have the tools to calibrate it. Call (682) 297-6476 to schedule your service.
Written by Marcus Deller, Owner at Servo Garage Doors Fort Worth, serving Fort Worth.