Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Fast, Reliable Garage Door Installation Across Fort Worth
Garage door installation in Fort Worth runs $700-$2,200 for a standard single or double door, depending on size, material, and wind-rating requirements. We serve every corner of Fort Worth, from Wedgwood to the Alliance corridor, and we quote every job with a flat, written price before any work begins. If you’re replacing a door that hailstorms have beaten up or one that’s simply worn out after decades on Blackland Prairie clay, call Servo Garage Doors Fort Worth at (682) 297-6476. Marcus Deller and our installation crew know exactly what Fort Worth doors are up against, and we’ll show you the evidence before we touch anything.
Why Servo Garage Doors Fort Worth Is Fort Worth’s Preferred Garage Door Installation Company
Most of our Fort Worth customers find us after reading three-star reviews of other companies and seeing the same complaints: vague quotes, surprise line items, and technicians who rush through the inspection. We don’t work that way. Clause 1 of The Haven Standard requires a written scope and a flat, written price before any work starts - not a verbal estimate, not a range over the phone. We hand you the dollar amount, in writing, before the first part comes off the truck.
The other thing Fort Worth homeowners notice fast is how we document the job. Clause 4 of The Haven Standard is why our technicians photograph the failed component before quoting a replacement. You see what we saw. Every visit closes with a documented photo record of findings and completed work, delivered to you. No other garage door company in Fort Worth makes that standard practice. Marcus Deller has built the local crew around it since 2015, and it shows in the detail work - checking frame squareness on old ranch homes in Ridglea before measuring anything, or hauling wind-rated steel doors through narrow Wedgwood openings without scratching the brick.
We answer the phone 24/7 with a live person. When you call about installation, you’ll get a named technician and an on-the-way text, not a callback window. Our team is background-checked, uniformed, and licensed. The license number is on the page, not buried in fine print.
Our Garage Door Installation Services in Fort Worth

New Door Installation
A new garage door installation in Fort Worth runs $700-$2,200, and we install Clopay, Amarr, Wayne Dalton, and Genie systems among others. What pushes the price up here is wind-load reinforcement and insulation. Fort Worth’s position in one of the most hail-active corridors in North Texas means it’s rarely worth installing a bare-bones door. We’ll walk you through the options in plain terms and show you the difference in steel gauge and strut count before you decide. The price is written before the work starts, and the install includes a photo record from the first measurement to the final balance check.
Our Garage Door Installation team carries the reinforcing materials on every job, so a wind-rated install doesn’t require a second visit.

Single Car Door
Single-car doors in Fort Worth are usually on older homes - the Wedgwood and Woodmont ranch houses with narrow 8-foot-wide openings that were standard before the 1970s. A typical single-car door install runs $700-$1,400 depending on insulation and wind rating. The trap is assuming a modern door will fit an old opening. We check frame squareness first, because the clay under those slabs has been moving for decades, and a door that’s perfectly square in the showroom will bind in a racked frame unless the tracks are set to compensate.

Double Car Door
Double-car doors are the most common install we do across Fort Worth, particularly in the post-2000 neighborhoods along the Alliance corridor and in north Tarrant County. A 16-foot-wide double door with wind-rated panels and insulation typically runs $1,200-$2,200, depending on material and window configuration. Hail damage is the dominant reason these get replaced. When spring storms crack panels on a builder-grade door, full replacement usually makes more sense than patching, and we’ll show you the photos that support that call before you commit.

Custom Garage Door
Custom garage door installations in Fort Worth are less about aesthetics and more about tightening the weather envelope. We’ve built custom steel doors for homes in Fossil Creek and Haslet with reinforced struts and impact-rated glass inserts, designed to take the hail loads this corridor throws at them. Custom doesn’t have to mean expensive - a lot of it is choosing the right gauge steel and the right insulation for the opening you have. We quote custom work the same way we quote standard installs: written price, written scope, before any work starts.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Fort Worth
We install and service doors from Clopay, Amarr, Wayne Dalton, and Genie, and we stock common replacement parts locally so Fort Worth homeowners aren’t waiting a week for a panel or a strut. Different brands matter in this climate - Amarr and Clopay make several wind-rated and impact-rated lines that handle North Texas hail better than the entry-level models from big-box stores. Our crew knows which models hold up on a 3-car garage in the Alliance corridor versus a 1960s single-car in Woodmont. We carry the trade vocabulary and the torque specs, but we’ll explain everything in one plain clause so you know what you’re buying.
Common Garage Door Installation Problems We See in Fort Worth Homes

- Hail-cracked panels on non-wind-rated doors. Spring storms across Tarrant County shatter the outer steel or aluminum skin on builder-grade doors, and the damage is rarely just cosmetic. Once the panel skin is compromised, the door’s structural stiffness drops, and the next storm hits harder than the first.
- Frames racked out of square by prairie clay. Fort Worth sits on expansive Blackland Prairie soil that swells after spring rains and shrinks hard during summer drought. Over years, that movement pulls garage door frames out of plumb, which causes track misalignment and cable wear that looks like a spring failure. We check frame squareness before quoting any installation.
- Torsion springs that snap in hard freezes. The February 2021 freeze wasn’t the first time Fort Worth saw springs fail overnight - it was the worst. Steel becomes brittle below freezing, and a spring under tension can shear clean through. We install high-cycle torsion springs (up to 25,000 cycles) on new doors, which cost a little more and break a lot less.
- Undersized openings from older ranch homes. Wedgwood, Ridglea, and Woodmont are dense with 1950s-1980s houses whose original garage openings are narrower than today’s standard door. Installing a new door on one of these requires careful track work and sometimes frame modification, not just a swap-out.
Pricing for Garage Door Installation in Fort Worth, TX
We publish the price ranges because that’s how this should work. A typical new door installation in Fort Worth falls between $700 and $2,200. The table below shows what we charge for the work that often accompanies an install, and every price is quoted and agreed before any work starts.
| Service | Fort Worth Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Panel Replacement | $250-$500 |
| Track Realignment | $120-$240 |
| Spring Repair | $180-$340 |
What moves the number inside those ranges: door size (single vs. double), wind-load rating, insulation level, and whether the existing frame needs realignment first. On older Fort Worth homes the frame work is what keeps the total honest. We’d rather tell you the door needs a track adjustment before install than have it bind and call it a warranty issue later. Estimates are free, and they’re in writing. Call (682) 297-6476 and you’ll have a number before you hang up.
We Also Serve Cities Near Fort Worth

While this page covers Garage Door Installation in Fort Worth specifically, our crew regularly crosses city lines to help homeowners in Haltom City, North Richland Hills, Hurst, and Bedford. The soil and storm patterns are similar, so the same wind-rated recommendations and written-pricing approach apply. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with local Fort Worth crews doing the hands-on work.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Fort Worth

No, Fort Worth does not currently mandate wind-rated garage doors for residential homes, but code minimums are not where your protection should stop. The city sits in one of the most hail-active corridors in North Texas, and a door rated for basic wind load will still dent and crack under the hail sizes this area sees regularly. We recommend at least a wind-rated door with reinforcement struts for any homeowner replacing a door in Fort Worth. Call (682) 297-6476 and we’ll show you the cost difference in writing before you choose.
Fort Worth sits on expansive Blackland Prairie clay that moves more dramatically than the denser, sandier soils common in parts of Dallas. When the clay swells after spring rains, it pushes against the slab edge and can rack a garage door frame out of square by a visible margin. In Fort Worth, we check frame squareness before any installation quote, because installing a new door into a racked frame guarantees binding and cable wear within a year. Dallas techs deal with this less, and Fort Worth techs who skip the check end up with callbacks.
For a new garage door in Fort Worth, we recommend a minimum wind-load rating of 110 mph with reinforcement struts, and higher if the house sits on an exposed lot without tree or neighbor cover. Impact-rated panels - the kind used on Clopay and Amarr wind-rated models - survive hail seasons that flatten standard doors. The cost premium is usually $200-$400 on a double door. We’ll show you the specifications in the written quote, and the price is set before work starts.
Yes, and we do it regularly. Ranches in Wedgwood and Ridglea often have narrow single openings and frames that haven’t been square in years. The install involves realigning or replacing the track, fitting a door sized to the actual opening rather than the nominal one, and occasionally minor frame correction. It’s more work than a standard swap, and we quote it accordingly in the written estimate. The result is a door that opens and closes cleanly in an opening that was never perfectly square to begin with.
Torsion springs break more often in Fort Worth winters because temperature swings - especially hard freezes - make steel brittle and the spring metal contracts under tension. The February 2021 freeze dropped temperatures fast enough to snap springs across the metro in one night. High-cycle springs are made from better-temperature-treated steel and are designed to handle the expansion and contraction. We install high-cycle springs on new Fort Worth doors as standard. Call (682) 297-6476 to talk through what your current spring is rated for.
Call Servo Garage Doors Fort Worth
Replacing a garage door in Fort Worth is a job that benefits from local knowledge - the wind ratings this corridor demands, the clay soil that racks frames, and the older openings that need careful fitting. We price it in writing before we start, we photograph everything, and we stand behind the work with the 365-Day Done Right Promise. Any written estimate from another company gets a free second opinion from us - bring the paperwork. Call (682) 297-6476 and talk to a live person about your garage door installation. The estimate is free, and the number you get is the number on the contract.
Written by Marcus Deller, Owner at Servo Garage Doors Fort Worth, serving Fort Worth since 2015.






Before
After
Before
After