Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterGarage Door Installation in Keller, TX: What It Costs and How to Get It Done Right
New garage door installation in Keller typically runs between $700 and $2,200, with most double-door replacements in neighborhoods like Hidden Lakes and Bear Creek landing near the $1,200-$1,800 mark depending on door size, panel style, and spring configuration. The big variable in Keller isn’t really the door itself. It’s whether the job clears your HOA’s architectural review board, fits a 9-foot-tall opening built for a 3-car bay, and accounts for the heavier torsion spring loads those oversized doors demand. We’ve handled all three since 2015, and every installation starts with a written price and a written scope, before any work begins. Call (682) 297-6476 for a free measure and a line-item quote.
Why Servo Garage Doors Fort Worth Is Keller’s Preferred Garage Door Installation Company
Keller isn’t a one-size-fits-all market. The housing stock here runs big: brick-and-stone two-story homes in planned communities, most built between 1995 and 2008, most with 3-car garages and 8-foot or 9-foot-tall door openings. That means every installation we do in Keller involves heavier doors, higher-tension spring systems, and more structural load than a typical single-car job in Fort Worth. Our crews know that before the truck arrives.
Marcus Deller has run Servo Garage Doors under The Haven Standard since 2015, and the system is simple: the technician photographs the existing hardware before quoting a replacement, then puts a flat written price and written scope in your hands before any work starts. That’s Clause 1. After the job, you get a documented photo record of what was found, what was replaced, and what was adjusted. Clause 4 is why the technician photographs the failed part before quoting a replacement. No handshakes, no “trust me.” Just a paper trail, in a town where HOAs already run on paperwork.
We answer the phone 24/7 with a real person, and we dispatch crews to Keller from our Dallas-Fort Worth office. Our Garage Door Installation team works in Keller weekly, and we quote the price on the page, in dollars, because “call for a quote” contradicts everything The Haven Standard stands for.
Our Garage Door Installation Services in Keller
New Door Installation
Most Keller homes we service were built between 1995 and 2008, which puts the original garage doors at 20 to 30 years old. At that age, the panel steel is dented from North Texas hail, the bottom seals are cracked, and the torsion springs are often on their second or third set. A full replacement in Keller runs $700-$2,200, and we quote that as a flat line item before ordering anything. Every new door install includes new track, new springs sized for the door’s actual weight and cycle count, and a photo record of the finished job.
Single Car Door
Single-car garages are the minority in Keller, but they do show up in older sections and a few detached garage setups. These doors are lighter and simpler than the 16-foot doubles we see daily. That said, the same HOA rules apply: approved panel style, approved color, and no visible damage left unaddressed. A single door replacement in Keller typically runs at the lower end of the $700-$2,200 range, but the written quote accounts for the opening’s actual height and the spring hardware, not a guess.
Double Car Door
This is the bread-and-butter job in Keller. Hidden Lakes, Bear Creek, and Keller Estates are full of 16-foot-wide, 9-foot-tall double doors on 3-car garages. These doors weigh more, need higher-cycle torsion springs, and frequently operate three times as many cycles per day as a single-car door because every bay gets used. When we hang a double door in Keller, we size the springs for the real daily load, not the builder’s minimum. That’s the difference between a door that lasts five years and one that goes 15.
Custom Garage Door
Custom doors in Keller usually mean one of two things: carriage-house styling an HOA has mandated, or a specific stain-and-panel combination that matches the home’s stonework and entry door. We work with Clopay, Amarr, and Wayne Dalton to get the panel profile, color, and hardware finish the architectural review board signed off on, then we install it to spec. Custom orders run $700-$2,200 in Keller. The quote includes the door, the custom finish, and the high-cycle spring package sized for a full-size opening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Keller
We install and service all eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. In Keller specifically, we stock the most common replacement parts for Clopay and Amarr doors, because those two brands dominate the mid-1990s and early-2000s subdivisions here. When your opener logic board fails or a Wayne Dalton torque tube binds, we don’t order parts and wait. We carry what Keller’s housing stock actually uses, and the truck is dispatched with the parts list already matched to your door’s make and model.
Common Garage Door Installation Problems We See in Keller Homes
- HOA stop-work orders from skipped architectural review. Keller’s planned communities have deed restrictions governing door style, color, and panel design. We’ve seen installers hang a door, then the homeowner gets a violation letter because the panel profile wasn’t approved. We handle the ARB paperwork and install the door that the board already saw on paper.
- Builder-grade springs on 3-car doors. The late-1990s subdivisions around Hidden Lakes standardized on low-cycle torsion springs rated for roughly 10,000 cycles. On a 3-car door getting daily use on multiple bays, that’s a 12-to-15-year lifespan. Many Keller homes are now on their second set, and that second set is due out across whole blocks at the same time. We size replacements for actual cycle counts, not the builder’s minimum.
- Track misalignment from expansive clay soil. Keller sits on black-clay soil that expands and contracts with moisture. Foundations shift, and door tracks that were plumb in 2003 are now binding and jumping drums. Before we hang a new door, we check and correct the track alignment. Skipping that step means the new door grinds and the cables fray within two years.
- Hail-dented panels needing insurance replacements. North Texas hailstorms are a near-annual event in Tarrant County. We handle insurance panel replacements and full-door replacements regularly in Keller, and we document the pre-existing damage with photos so the claim file matches what State Farm or USAA approved. The price is quoted before work starts, and the insurer sees the same photo record you do.
Pricing for Garage Door Installation in Keller, TX
We don’t do “call for pricing.” Here are the line items, quoted flat and in writing before any work begins:
| Service | Keller Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Custom Garage Door | $700-$2,200 |
| Track Realignment | $120-$240 |
What moves the price on a Keller installation: door width (16-foot doubles cost more than 8-foot singles), door height (9-foot openings are standard in Hidden Lakes and Bear Creek, but they require more track and heavier springs), panel material (steel runs less; wood and custom finishes run more), and whether the existing track can be reused or needs full replacement. The quote is a fixed number, not an estimate that drifts. You agree to the price before we order the door. If the job changes, the price changes in writing first. That’s Clause 1 of The Haven Standard, and we’ve worked that way since 2015.
We Also Serve Cities Near Keller
While this page is for Garage Door Installation in Keller, our crews also run jobs in North Richland Hills, Southlake, Haltom City, and Colleyville. Same written-price system, same photo record on every visit. If you’re just outside Keller, call us and we’ll confirm coverage before you schedule.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Keller
Yes. We install carriage-house doors from Clopay, Amarr, and Wayne Dalton in the exact finish and panel profile your ARB approved, and we file the architectural review paperwork before the door is ordered. Most Keller HOAs in Hidden Lakes and Bear Creek want photos and a spec sheet attached to the application. We prepare both. The door arrives pre-finished, not stained on-site, so the color matches the sample the board signed off on.
No, a standard low-cycle spring set will not hold up. Bear Creek homes were built with torsion springs rated for roughly 10,000 cycles, and a 3-car garage getting daily use on all bays burns through that in 12 to 15 years. We install high-cycle springs rated for 25,000 to 50,000 cycles on Keller installations, sized specifically for the door’s measured weight and daily cycle count. The price difference is small; the lifespan difference is roughly triple.
Yes, in almost every case. Keller’s expansive black-clay soil causes foundation movement that throws tracks out of plumb, but that doesn’t require slab work to fix. We measure the track alignment with a laser before hanging the new door, then shim or adjust the vertical tracks and flag brackets to bring everything back to true. The new door goes on square. If the foundation shift is severe enough that the opening itself is out of square, we document it in the photo record and adjust the door to follow the opening’s actual dimensions, not the original 1998 spec. Call (682) 297-6476 and we’ll send a technician to measure it.
It depends on your specific deed restrictions, but in most Keller Estates sections, replacing panels with an identical product from the same manufacturer does not require a new ARB application because the door’s appearance is not changing. If the original door is discontinued and the replacement panels would alter the panel profile or color, then yes, the board typically wants to review it. We’ll tell you which situation applies to your specific door, and we’ll prepare the paperwork either way. The quote is written before any work starts, and your insurer gets the same photo record we give you.
We install belt-drive openers from LiftMaster and Chamberlain that run substantially quieter than the chain-drive units common in 1990s Keller builds, and we mount the opener on vibration isolators so the motor’s noise doesn’t travel through the ceiling framing. The door itself gets nylon rollers instead of steel, which cuts rail noise. The combination is what HOAs in Hidden Lakes and Bear Creek have accepted in noise complaints, because the street-facing door is tested by the board’s own standards. If your opener is loud enough to draw citations, the fix is a belt-drive retrofit, not lubrication.
Get a Written Price for Garage Door Installation in Keller
You’ll get a flat, written price and a written scope before any work starts. That’s the rule, not a selling point. Every job ends with a documented photo record of what was found and what was done, so you can show the HOA, the insurer, or the next homeowner exactly what was installed. Marcus Deller and the team at Servo Garage Doors Fort Worth have made 18,000+ garage doors right since 2015 under The Haven Standard. If a competing estimate comes in lower, bring it in. We’ll give you a free second opinion, no coupon required.
Call (682) 297-6476 for a free measure and a written quote in Keller, TX.
Written by Marcus Deller, Owner at Servo Garage Doors Fort Worth, serving Keller homeowners since 2015.
Garage Door Installation in Nearby Areas
