Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterCable Repair in Fort Worth, TX
Garage door cable repair in Fort Worth typically costs between $150 and $290, depending on whether you need a standard replacement or a heavy-duty set for a custom carriage-house door. If your door is crooked, won’t close all the way, or makes a loud snapping sound, you likely have a broken or frayed cable. At Servo Garage Doors Fort Worth, our Garage Door Repair services handle these issues daily, ensuring your door balances correctly so it doesn’t strain the opener or fall unexpectedly. Call (682) 297-6476 for a written, upfront quote before we touch a single bolt.
Your garage door cables are under high tension, meaning they are dangerous to handle without the right tools and training. This isn’t a DIY job; the cables are attached to the bottom bracket of the door and wind onto drums located at the ends of the torsion bar. If the cable snaps, the door loses its support, often causing it to slam shut or hang unevenly. This is a common service request we see across Fort Worth neighborhoods, from the older homes in Fairmount with heavy wood doors to the newer builds in Walsh Ranch where modern, insulated steel doors are the standard. When you need Garage Door Repair in Fort Worth, our technicians arrive with the specific replacement cables for your door weight and brand, such as Clopay or Amarr, ensuring the repair meets The Haven Standard.
When You Need Cable Repair
You don’t always need to be a mechanic to spot a failing cable. Because we believe in transparency, we encourage homeowners to look for these specific warning signs. If you see any of the following, stop using the door immediately to prevent damage to the opener or the door panels.
- The door hangs crooked: If one side of the door hangs lower than the other, the cable on that side has likely snapped or slipped off the drum. This creates an uneven load that can twist your garage door tracks.
- Visible fraying or rust: Inspect the cables running along the sides of the door. If you see “fuzzy” steel strands or heavy corrosion, the cable is compromised. In humid Fort Worth springs, we often see this accelerated by moisture trapped in older, unsealed garage environments.
- The door won’t open or close: If your opener runs but the door barely moves or gets stuck halfway, a snapped cable has likely jammed the mechanism. Trying to force it can strip the gears in your Chamberlain or Genie opener.
- Loud snapping sound: A cable snap is distinct and loud. It sounds like a gunshot or a heavy metal object hitting the concrete floor. If you heard this while operating your door, do not attempt to lift it manually.
- Cable off the drum: Sometimes the cable hasn’t snapped but has jumped the cable drum. This usually happens when the door hits an obstruction or the springs are improperly balanced. We can often reset this, but we must first inspect the drums for damage, per Clause 4 of The Haven Standard.
Our Cable Repair Process
We operate under The Haven Standard, which means we do not guess and we do not provide “ballpark” numbers over the phone. We follow a strict, evidence-based process to fix your cables safely and permanently.
- Site Safety Assessment: Upon arrival, our technician secures the area. Because cables are under high tension, we lock the door in place using specialized clamps to prevent sudden movement.
- Photographic Evidence: Per Clause 4, we photograph the failed cable and the drum assembly. You will see exactly what we found, whether it is a frayed strand or a completely severed cable, before we suggest a solution.
- Written Scope and Price: We present a flat, written price for the repair. This covers the cost of the high-tensile steel cables, the labor to install them, and the re-balancing of the door. You sign off on this scope before we start.
- Removal and Installation: We remove the old, compromised cables and replace them with new, manufacturer-spec cables. We ensure they are properly seated on the cable drums and that the tension is calibrated to your door’s specific weight.
- Balance and Safety Test: Once installed, we test the door’s balance. A properly balanced door should stay in place when lifted halfway. We then check the safety reversal system to ensure the door stops if it encounters an obstruction.
- Documentation: We provide a final photo record showing the new cables installed and the door operating smoothly. This documentation is your receipt and record for our 365-Day Done Right Promise.
BeforeAfterCable Repair Pricing in Fort Worth
We provide upfront, written pricing because we believe a customer should never be surprised by an invoice-learn more in How Much Does Garage Door Repair Cost? (2026 Price Guide) - Fort Worth, TX. Cable repair costs are determined by the weight of the door and the type of cable system required. Standard residential doors typically use 1/8-inch or 5/32-inch cables. If you have a heavy, carriage-style wooden door, you may require thicker, heavy-duty cables, which changes the material cost.
| Service Type | Typical Price Range |
|---|---|
| Standard Cable Replacement (Pair) | $150 - $220 |
| Heavy-Duty / Custom Door Cables | $200 - $290 |
| Drum Inspection & Cable Reset | $130 - $180 |
If you have a written estimate from another company, bring it to us. We offer a Free Second Opinion. We will review their scope and ours, and if we can complete the work, we will provide our own written price based on The Haven Standard. Call (682) 297-6476 to schedule your service or request an estimate.
FAQs - Cable Repair
Can you repair my garage door cables today?
Yes, we offer Garage Door Repair Near Me in Fort Worth, TX with same-day service for cable repairs. Because a broken cable renders your garage door unusable and potentially unsafe, we prioritize these calls to get your home secured as quickly as possible.
Is it cheaper to repair the cable or replace the whole door?
Repairing a cable is significantly cheaper than replacing a door, provided the cable is the only component that failed. We will inspect your door panels and hardware; if the door structure itself is sound, a cable replacement is the most cost-effective solution, though Panel Replacement may be needed if panels are damaged. Call (682) 297-6476 if you aren’t sure about the condition of your door.
Why did my cables snap?
Cables are wear-and-tear items that eventually fatigue, but they often fail prematurely due to improper spring tension or lack of lubrication. If your garage door springs are not balanced, the cables take on extra stress, leading to fraying. We always check the balance of your door as part of our repair process.
Do I need to replace both cables if only one snapped?
Yes, we always replace cables in pairs. If one cable has snapped due to fatigue or age, the other cable has experienced the exact same amount of wear and is likely close to failure. Replacing both ensures your door remains balanced and prevents a second service call for the same issue next month.
If you need expert assistance with your garage door system, we are ready to help. At Servo Garage Doors Fort Worth, we prioritize clear communication, written documentation, and solid workmanship. Whether you are dealing with a snap or just notice signs of wear, call (682) 297-6476 today to get a firm, written quote and professional service you can rely on. You can also visit our home page to learn more about our commitment to The Haven Standard.
Written by Marcus Deller, Owner at Servo Garage Doors Fort Worth, serving Fort Worth.