A Servo company - serving Fort Worth, TX

Spring Repair in Fort Worth, TX

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as $59/month*on approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Styles & brands we work with

Raised-panel steel
Raised-panel steel
Carriage house
Carriage house
Modern flush
Modern flush
Full-view glass
Full-view glass
LiftMaster openers
LiftMaster openers
Chamberlain openers
Chamberlain openers

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Garage Door Spring Repair in Fort Worth, TX

While our Garage Door Repair services cover many issues, garage door spring repair in Fort Worth typically costs between $220 and $450, depending on the spring size, wire diameter, and whether your system requires a single or dual-spring conversion. At Servo Garage Doors Fort Worth, we provide a flat, written price before we touch a single bolt, adhering to Clause 1 of The Haven Standard. If you hear a loud bang in your garage or notice your door won’t lift more than a few inches, your torsion spring likely snapped, and we can usually complete the replacement on the same day you call (682) 297-6476.

We operate as an independently owned business, not a franchise, serving the unique needs of Fort Worth homeowners. Whether you live near the historic homes of Fairmount or in the newer developments in Alliance, your garage door relies on the tension stored in those springs to offset the weight of the door. When that tension fails, it is not just a nuisance; it is a security risk. Our team documents every failure with a photo record before we quote a repair, ensuring you see exactly what failed and why. This evidence-based approach is how we have made over 18,000 garage doors right since 2015.

If you are looking for general Garage Door Repair in Fort Worth, our team is ready to assist. We service all major brands, including Chamberlain, Genie, and Clopay, ensuring that your specific system gets the correct replacement parts rather than a generic, one-size-fits-all solution.

When You Need Spring Repair

Recognizing the signs of a failing spring early can prevent damage to your opener’s logic board or trolley carriage. Because Fort Worth experiences significant temperature fluctuations, metal fatigue in springs is common as the seasons change. Here are the symptoms that indicate it is time to call us:

  • The “Loud Bang” Scenario: You hear a sudden, sharp noise in the garage resembling a firecracker or a gunshot. This is the sound of a spring snapping under high tension, and it is the most common indicator of failure.
  • Door Won’t Lift: If you try to open your door and it lifts only three to six inches before stopping, the opener is detecting that the door is too heavy to move. Do not force the opener to work, as this can strip the gears.
  • Visible Gap in the Coil: If you see your torsion springs mounted above the door header, look for a visible gap or separation in the metal coils. If there is a break, the spring is compromised and requires immediate replacement.
  • Door Is Crooked or Hesitant: If the door hangs unevenly when opening or closing, or if it feels jerky during the travel cycle, one spring may have lost its temper or tension, causing the door to bind in the tracks.
  • Loose or Frayed Cables: When a spring snaps, the cables often lose tension and may slip off the drum. If you see slack cables dangling near the bottom fixtures, stay clear of the door, as high-tension components are dangerous.

Safety Warning: Garage door springs operate under immense tension. Attempting to adjust or replace them without the proper winding bars and training can result in severe injury. If your spring has failed, keep family members and pets away from the garage door area and call (682) 297-6476 for a professional assessment.

Our Spring Repair Process

Technician using pliers to repair a garage door roller
Our Spring Repair Process

We follow a strict, documented process for every spring repair to ensure safety and longevity. Under The Haven Standard, we do not guess or estimate; we verify. Here is how we handle your repair:

  1. Physical Inspection and Documentation: Upon arrival, our technician performs a full visual inspection. Per Clause 4 of The Haven Standard, we photograph the failed spring and the door hardware. We show you the photo record so you understand exactly what failed before we discuss the solution.
  2. Measurements and Specifications: We do not rely on generic parts. We measure the wire diameter, the inside diameter of the spring, and the length of the coil. This ensures we provide the correct spring cycle rating for your specific door weight.
  3. Written Quote Delivery: Before we touch a single tool, we provide a flat, written price and a clear scope of work. You will know exactly what the total cost is, with no hidden fees or “surprise” add-ons.
  4. Controlled Tension Release: Using specialized winding bars, we safely release the remaining tension from the system. This is the most critical safety step, and we perform it using established mechanical procedures.
  5. Replacement and Calibration: We install the new, high-cycle springs and re-tension the system to match the manufacturer’s balance requirements. We then cycle the door multiple times to ensure it lifts smoothly and stops exactly where it should.
  6. Final Verification: We provide a final photo record showing the new springs installed and the door functioning correctly. This documentation is your receipt and your proof that the work was done to standard.
BeforeBefore
AfterAfter

Spring Repair Pricing in Fort Worth

We believe in transparent, upfront pricing, and you can learn more in our guide on How Much Does Garage Door Repair Cost? (2026 Price Guide) - Fort Worth, TX. The cost of spring repair in Fort Worth depends on the size of the spring required for your specific door. We stock a variety of high-cycle springs to ensure we have the right fit for your home.

Service Item Typical Price Range
Standard Torsion Spring Replacement (Single) $220 - $320
Dual Torsion Spring System Replacement $350 - $450
High-Cycle Spring Upgrade (Extended Life) $280 - $380

These prices include the labor, the new parts, and the full safety inspection of your door system, including checking for any needed Track Realignment. We do not charge “trip fees” on top of our quoted work. If you have a written estimate from another company, we offer a Free Second Opinion to ensure you are getting a fair deal. Call (682) 297-6476 to get your exact price.

FAQs - Spring Repair

Technician performing professional garage door spring repair and maintenance
FAQs - Spring Repair

Is it cheaper to repair the spring or replace the garage door?

In almost every case, repairing the spring is significantly cheaper than replacing the entire garage door, though related issues like Cable Repair may also need attention. Springs are wear-and-tear items designed to be replaced, similar to tires on a car, and a professional replacement can restore your door to full functionality for a fraction of the cost of a new system. If you aren’t sure if your door is worth the repair, call us at (682) 297-6476, and we will provide an honest assessment of your hardware’s condition.

Can you fix my garage door springs today?

Yes, we prioritize spring repairs because a broken spring leaves your garage door inoperable and potentially insecure. When you call us, we will provide an estimated arrival window, and our technicians arrive with the tools and parts needed to handle most standard torsion spring replacements on the spot. We are available 24/7, so you do not have to wait until the next business day.

Why do I need a professional to replace my springs?

Garage door springs are under extreme tension and are responsible for lifting the entire weight of your door, which can exceed 300 pounds. Using the wrong size spring or improper winding technique can cause the spring to snap or the door to collapse, posing a serious safety risk to you and your property. Our technicians are trained to calculate the precise torque needed for your specific door, ensuring the system is balanced and safe to operate.

Do you offer a warranty on your spring repairs?

Every repair we perform is backed by our 365-Day Done Right Promise. If the repair is not done right, we make it right. This promise is part of the documentation you receive at the end of every visit, ensuring you have a clear record of the work performed and the guarantee behind it.

If you suspect your springs have failed, do not wait for the situation to worsen. A door that is difficult to open puts unnecessary stress on your opener’s motor and can lead to more expensive repairs down the line. We are ready to help you get your door moving again with the precision and documentation you expect from a professional service. Call (682) 297-6476 today for a free estimate or to schedule your service-we are ready to help.

Written by Marcus Deller, Owner at Servo Garage Doors Fort Worth, serving Fort Worth.

Need Garage Door help in Fort Worth? Licensed & insured · within the hour response · free estimates
Call (682) 297-6476
Local Service Coverage

Request a Free Estimate in Fort Worth

Tell us what you need - Servo Garage Doors Fort Worth responds fast. No obligation.

When you submit this form, you accept our Privacy Policy and agree that you may be contacted via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Call Now - 24/7 Dispatch